Why Brother Printer In Error State Message Occurs? (StepWise Guide)
There is a report that users frequently confront the Brother printer in an error state. There are a myriad of reasons to blame for this issue. The most likely causes are incompatible printer drivers, inaccurate printing settings, or other technical issues within the print spooler system.
If you’re experiencing brother printer in error state, you must implement a few techniques to resolve the issue by yourself.
Fix Brother Printer in Error State
Here are the most effective ways to troubleshoot that you can attempt to fix the Brother printer issue. Therefore, with no further delay, we’ll get started!
Method 1: Reset the Printer Settings
In many cases, wrong printing settings can consequence for the printer and result in a printer of Brother in an error mode. To remove this problem it is possible to reset the printer’s settings.
Click the Windows logo as well as press the R key to open the Run window. In the Run dialog box, type “devmgmt.msc” and hit the Enter key to successfully execute the command.
After you have followed this step Following this procedure, following the procedure, the Device Manager screen will be displayed. In this window, you must press”View” to open the “View” icon that is located at the top of the menu. Then, search for “Show Hidden Devices” and add a tick on the box.
On the next screen, move to “Ports (COM & LPT)” and click”Properties” in the next screen “Properties” button in order to open the window. After that, you can go to”Port Settings” which is located under the “Port Settings” tab that is located under the “Properties” window.
You must look to find”the “Use any interrupt assigned to the port” option, and then choose the option below “Enable legacy Plug and Play detection”. After that, click the “Apply” button as well as the “OK” button in order to save the changes you made recently.
Following the steps above After completing the above steps, you are able to reboot your computer. After your device has booted you can test whether the Brother printer error is solved or not. If the issue persists, you may choose the next option.
2. Make sure you have the printer of your Brother online
In this process, we recommend that you determine whether your Brother Printer is Online. To verify this, follow the steps below:
In the Run dialog box, type “Control” and hit the “OK” button to run the command.
In the window that results Choose from the result-oriented window, click on “Control Panel” in order to open the window.
After you’ve logged in to through the Control Panel, head over to the “Devices and Printers” and select”Printer” as your “Printer”.
The next screen will look over your printer’s status. If your printer displays an Offline, proceed to press the right button and select the option that says “Use Printer Online”.
In addition, you can click then the “OK” button twice to save the latest changes.
Method 3: Set the Print Spooler Service as Automatic
The setting of the print spooler’s service to automatic will also assist to solve the Brother printer issue. To achieve this it is best to follow the instructions for setting it up.
In the Run dialog box, type in “services.msc” and tap on the “OK” button to run the command. Following this step the Service window will be opened. Within the window for Service, you can scroll through the available choices until you see an option that is called the Print Spooler Service. If you do click on it, and then click”Start” from the menu “Start” button from the menu.
After that, tap after that, click on the “Properties” icon in order to open the window. Navigate to the “General” tab and tap on the “Startup Type”. Further, set the “Startup Type” as “Automatic”. After you have completed these steps, click”Apply” “Apply” button to save the modifications. Shut down the window of Service after you’re done with this step.
Method 4: Install the Windows Pending Updates
If you are not installing the Windows update, the appearance of Brother printer errors is frequent. This is why you can resolve this issue by installing Windows waiting for updates.
To complete this task follow the steps below:
- Click on”Start” and then the “Start” menu and initiate the “Settings” app.
- Then, search for “Update and Security” and open the menu.
- From the menu you can select “Windows Update” and hit the option that says “Check for Updates”.
- If you spot any updates that are available, press the “Install Update” button from the menu.
- Don’t wait until the installation process has finished.
- Once the installation is complete After the installation is completed, you can determine if the Brother printer that was in an error has been fixed or not.